Chamberlain 1025 Manuel d'utilisateur télécharger pdf (Page 4)

OPERATION

The controls and display on the ACRx 2 panel are very simple

for ease of operation. Most programming tasks require pushing

one button for the desired operation, then completing the

displayed instructions. A summary of these procedures is

printed inside the ACRx 2 panel door.

Before use, each transmitter must be programmed into the

system by the Add Users function. This “learns” the unique

radio code of that transmitter, and assigns it a User ID code

chosen by the programmer; this User ID may be the user’s

name, unit number, or any combination up to five letters and

numbers. Once programmed, the transmitter can be used to

control access. The ACRx 2 can output the date, time, and User

ID for each access. User IDs can be Deleted when no longer

allowed, or Blocked from access temporarily. A Setup function

is used to set the time, date, and other details of ACRx 2

operation.

Setup

Basic settings on the ACRx 2 are changed through the Setup

routine. These include the time, date, and other optional settings.

To change any of the following items, press the SETUP/EXIT

button. The message “scroll for MENU” will appear; turn the

dial to choose the item that you want to change, then press the

ENTER button.

If you wish to leave the Setup mode without doing anything,

press SETUP/EXIT again to return to the regular display, which

shows the date and time alternately.

Change PASSWORD: A password may be used to protect the

ACRx 2 against unauthorized access. The unit is shipped with

the Password function disabled. To enable this feature, select a

four digit password composed of letters and/or numbers. Once a

password has been entered no changes can be made to the

ACRx 2 memory without supplying the password. If you forget

your password, it cannot be retrieved.

To disable the Password function, change the password to all

spaces.

Set the TIME: When “Set the TIME” is displayed and you press

ENTER, the current time will be displayed in

hour/minute/second/AM-PM format. The first digit will be

underlined. Turn the dial until that digit is set, then press

ENTER. Repeat until all digits are correct. Press ENTER one

more time and the time is set. “Set the TIME” will be displayed

again. Press SETUP/EXIT to return to the regular display.

Set the DATE: When “Set the DATE” is displayed and you

press ENTER, the current date will be displayed in

month/day/year format. The first digit will be underlined. Turn

the dial until that digit is set, then press ENTER. Repeat until all

digits are correct. Press ENTER one more time and the date is

set. “Set the DATE” will be displayed again. Press

SETUP/EXIT to return to the regular display.

Set RELAY Mode: The method of relay operation depends on

the type of gate or door opener the ACRx 2 is controlling. The

three types of operating modes are described as follows:

• Momentary Close: The relay contacts will close for 1/3

seconds each time a valid user’s transmitter code is received.

This is the factory default state of the ACRx 2, and the most

commonly used.

• On When Receiving: The relay contacts will close when a

valid transmitter code is received, and remain closed until the

user releases his transmitter button.

• Toggle ON/OFF: The relay contacts will close when a valid

transmitter code is received, and remain closed until the next

one is received. The relay will continue to toggle ON/OFF in

this manner for each valid code received. This mode is useful

when the relay must stay on after the user releases his

transmitter button.

Set BAUD RATE: When “set BAUD RATE” is displayed and

you press enter, a message appears which instructs you to scroll

for the baud rate selections. Turn the scroll knob until the

desired rate appears, and the press ENTER. Selectable baud

rates are 1200, 2400, 4800, and 9600 baud. This is only

applicable to the RS232 port of the ACRx 2. If you are not

using the ACRx 2 with an external printer or a computer, then

you do not have to be concerned with this setting.

NOTE: once a new baud rate is selected, it does not take

affect until the ACRx 2 is turned off and re-powered.

Add User

Each 80 series “Billion Code” or 90 series “SECURITY PLUS”

transmitter is uniquely coded at the factory; no two transmitters

have the same code. When adding a user there is no need to

program the transmitter or set code switches. If using 60 series

(or older) transmitters, each transmitter should have a different

code setting.

Press the ADD USER button to choose the Add User mode. The

display will show “USER ID = _____”. Turn the dial until the

first letter of the desired User ID is shown, then press ENTER.

Repeat until all the letters or numbers (up to five) are displayed.

Press ENTER twice to confirm that User ID.

Instead of selecting a custom User ID yourself, the ACRx 2 can

choose a number for you. Simply press ENTER 5 times when

“USER ID _” is displayed (enter a User ID of all blanks), and

the next ID number in sequence will be automatically assigned.

This will be a numerical only ID.

The display will now show “TRANSMIT NOW!” and the green

light next to the display will stay on. Press the button on the

transmitter for that User ID. The display will show “Add User

COMPLETE”. That transmitter is now an authorized user; when

pressed, it will grant access for that User ID.

If there is a mistake or a problem at any time, press

SETUP/EXIT to start over. These steps can be repeated to add

more users.

Delete User

Press the DELETE USER button. The display will show “USER

ID = _____”. Turn the knob until the first letter of the User ID is

shown, then press ENTER. Repeat until the entire User ID is

displayed.

The display will show “DELETE <USER ID>?” Press ENTER

to delete that User ID, or EXIT to cancel and start over.

After ENTER is pressed, the display will flash “Del Usr

COMPLETE”. When a User ID is deleted, the ACRx 2 will no

longer respond to that transmitter and all record of that user is

deleted from the ACRx 2.

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Chamberlain 1025 Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Cuisine Chamberlain 1025